Crestron CNXRMCLV, Руководство по эксплуатации

Страница: 18 / 40

Room Solution Box with Local Video Crestron CNXRMCLV
14
•
Room Solution Box with Local Video: CNXRMCLV Operations Guide - DOC. 8161A
Recommended Audio/Video Input Configurations
As described previously, the CNXRMCLV provides four inputs for video and/or
digital audio (VIDEO IN 5 – 8) and three pairs of left/right analog audio inputs
(AUDIO IN A – C). Recommended configurations are given in the tables below.
Rear Panel View
OUT IN
6 8
5
IN
7
B D
A C
VIDEO
CNXRMCLV
F H
E G
R
A
L
B
R
AUDIO
C
L
R
L
REC
OUT
OUT
Recommended Video Input Configurations
Source Configurations
Video Input* 1 2 3
5 Composite 1 S-Video 1 (Y) Component (Y)
6 Composite 2 S-Video 1 (C) Component (Pb)
7 Composite 3 S-Video 2 (Y) Component (Pr)
8 Composite 4 S-Video 2 (C) Digital Audio
*Video inputs 1 – 4, not listed here, are baseband signals from the CNX-PVID8 via CAT5. Their
configuration depends on the video signals provided to the CNX-PVID. Refer to the description of the
VIDEO IN port on page 5 for details.
Recommended Audio Input Configurations
Source Configurations* Audio
Input
1 2 3 4
A Audio Dev. 1 Composite Dev.1 S-Video Dev. 1 Component Dev.
B Audio Dev. 2 Composite Dev. 2 S-Video Dev. 2 Composite Dev.
C Audio Dev. 3 Composite Dev. 3 Audio Dev. S-Video Dev.
*Suggested configurations of audio supplied by source devices (Dev.)
Universal Remotes
Any universal remote transmitting RC5 code (and some Sharp codes) can
communicate with the CNXRMCLV and allow the user to select and activate any
function in the control system. An RC5 code is 14 bits long. Each code includes a
5-bit address (or system) and a 6-bit command. Sharp uses a different IR protocol,
but some of their codes are acceptable.
NOTE: The Philips Pronto contains built-in RC5 commands for out-of-the-box use.
Setting up a Philips Pronto is easy!
If using the Philips Pronto, select RC5 code communication. For the Philips Pronto,
the RC5 system number is equivalent to Crestron's
Transmitter ID code, which is a
unique identifier assigned to each transmitter. Likewise, RC5 command number is
equivalent to Crestron's
Button ID , which is synonymous with the join number used
in SIMPL Windows. There is no need to perform the two multi-step procedures in
the subsequent sections.