Crestron
CEN-TVAV
Ethernet Enabled Programmable TV/AV Controller
Ensure that the operating system version currently loaded is equal to or newer than
the version included here, so that the program runs properly. For help with uploading
an operating system, refer to “Updating the CEN-TVAV” on page 21.
File Types in Ops Subdirectory
FILE TYPE
DESCRIPTION
.upz
This is a control system file. For more information regarding these
files, refer to "Updating the CEN-TVAV".
Programs Subdirectory
- The files (described in the table below) in this
subdirectory contain the system program. This is the main program that loads into
the CEN-TVAV and determines the exact functionality.
File Types in Programs Subdirectory
FILE TYPE
DESCRIPTION
.asv
SIMPL Windows auto-save file.
.bin
This is the executable code for the CEN-TVAV.
.csz
Crestron SIMPL+ archive. This archive contains all of the SIMPL+
executable code (from both user modules and Crestron modules) that
the Transfer Program dialog will send to the CEN-TVAV.
.dip
This is the default IP Table that contains the IP addresses of all of the
ethernet devices in the system. It is generated when the program is
compiled.
.sig
This file contains information required by Test Manager (see SIMPL
Windows help for more information) for debugging programs in real-
time. It is generated each time the program is compiled.
.smp
This is the SIMPL-C file that is generated from the SMW file when a
program is compiled. In SIMPL Windows version 1.18 or lower, this
file is what actually gets compiled into the BIN file. In versions after
1.18, this file may or may not be generated and is not required.
.smw
This is the SIMPL Windows program file. It contains the source code
for the main system program.
.sm2
SIMPL Windows program backup file.
Userdb Subdirectory
- The file (described in the table below) in this subdirectory is
a user database IR driver that is needed to interface with certain IR-controlled
devices. This driver differs from Crestron database IR drivers in that the former are
included as part of a Crestron Database release.
File Types in Userdb Subdirectory
FILE TYPE
DESCRIPTION
This is a user IR driver file. It is needed during the convert/compile
process in order to properly compile the program. If recompilation of
the program is necessary, use the Import Program option or copy any
IR files received into the default user database directory (see SIMPL
Windows help for more information). Alternatively, set the SIMPL
Windows
userdb
directory to the directory where the macros exist. (In
SIMPL Windows, this is accomplished from the Directories tab by
selecting
Edit
|
Preferences
.)
.ir
Operations Guide - DOC. 5720A
Ethernet Enabled Programmable TV/AV Controller: CEN-TVAV
•
15
