Crestron CEN-TVAV, Руководство по эксплуатации

Страница: 11 / 52

Crestron CEN-TVAV Ethernet Enabled Programmable TV/AV Controller
Leading Specifications
The table below and continued on the next page provides a summary of leading
specifications for the CEN-TVAV. Dimensions and weight are rounded to the
nearest hundredth unit.
Leading Specifications of the CEN-TVAV
SPECIFICATION DETAILS
Power Input Requirements: US 115VAC, 50-60 Hz, 6.6A maximum
International 230VAC, 50-60 Hz, 5.5A maximum
Power Output: US
115VAC, 50-60 Hz, 6A maximum
International 230VAC, 50-60 Hz, 5A maximum
Ethernet Network Type
10BaseT
Ethernet Network Protocols TCP/IP, UDP/IP, ICMP (Ping), & CIP
IR Reception Frequency 455kHz
IR Reception Angle
Approximately 30
o
centered on IR receiver.
SIMPL Windows
Version 1.52.01 or later
1
and TIO Files
Version 109 or later
1
CEN-TVAV Update File
Version 51205V.UPZ or later
2
CNMXS-AV/Pro Update File
Version 51204X.UPZ or later
2
CNRACKX/-DP Update File
Version 51204W.UPZ or later
2
MaxAnalogSignals
2048
3
MaxDigitalSignals
16373
3
MaxNVRAM
Not Applicable
4
MaxProgramSize for SIMPL-C 256K (Ethernet section disabled with invalid
IP Address of 0.0.0.0)
100K (Ethernet section enabled with valid IP
Address)
MaxProgramSize for SIMPL+ 512K
Dimensions & Weight Height: 1.70 in (4.32 cm)
Width: 7.07 in (17.95 cm)
Depth: 6.32 in (16.06 cm)
Weight: 3.63 lb (1.65 kg)
5
1 The latest software version can be obtained from the Downloads page (SIMPLWIN
Library) of Crestron’s website (
www.crestron.com) . New users are required to
register in order to obtain access to the FTP site.
2 Filenames for update files have a UPZ extension and can be obtained from the
Downloads page (OPSYS Library) of Crestron’s website.
3 Maximum number of SIMPL Windows signals that CEN-TVAV can process.
4 The CEN-TVAV has a simulated clock and simulated NVRAM. If power is lost, the
clock and symbols utilizing simulated NVRAM do not maintain previous settings.
5 The weight listed is the combined weight of the CEN-TVAV, STIRP, 5-pin
connector, and modular cable.
As of the date of manufacture, this unit has been tested and found to comply with
specifications for CE marking.
NOTE: This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Operations Guide - DOC. 5720A Ethernet Enabled Programmable TV/AV Controller: CEN-TVAV
•
7