Crestron
CEN-RGBHV
Wideband RGB Matrix Switcher
Blanking Setup
“Blanking Setup” Screen
Setup Menu
Blanking Setup
To set up blanking, press the
ENTER
button
Blanking Setup Screen 2
To adjust blanking
select an output
Press the front panel
OUT
button for the output you wish to adjust.
For example, to set blanking for output number
1
, press the
OUT
button below
1
on
the front panel. The LED above
OUT
1
will light and the current blanking setting for
output 1 will be displayed.
“Out 1 Blanking” Screen
** Out 1 Blanking **
0.0 sec
Use the quick-adjust knob to change the blanking time. In this example, we will
change the blanking for output 1 from 0 to 0.5 seconds. The display will show the
change in blanking time along with a bar graph.
“Blanking” Screen
Blanking 0.5 sec
Press
ENTER
to save the new setting. The display will return to the “Blanking
Setup” screen. Press
ENTER
to select another output.
Use the quick-adjust knob to select another category. The next category is Network
Setup.
Network Setup
“Network Setup” Screen
Setup Menu
Network Setup
Operations Guide – DOC. 6612C
Wideband RGB Matrix Switcher: CEN-RGBHV
•
37
Содержание CEN-RGBHV
Страница 1: ...Crestron CEN RGBHV WidebandRGBMatrixSwitcher Operations Guide ...
Страница 4: ......
