Crestron CEN-RGBHV, Руководство по эксплуатации

Страница: 34 / 56

Wideband RGB Matrix Switcher Crestron CEN-RGBHV
Password Entry Screen
Del Ins < >
The default password for the CEN-RGBHV is 12345. You can change the password
using the Control Setup / Password screen (refer to “Control: Password” on page 42).
Use the buttons below the < and > symbols on the display to navigate to the digit you
wish to set. Use the buttons below Del and Ins to delete and/or insert digits. Change
a digit by rotating the quick-adjust knob. When the password in entered, press
ENTER to go to the setup menus.
When the setup menus are used for the first time, after password entry, the system
will display the main Audio Setup screen. If the setup menus have previously been
used, the system will display the first screen in the last used category. From any of
the top level menus, you can select a different category by using the rotary quick-
adjust knob on the front panel.
NOTE: The ▲ and ▼ symbols in the lower right corner of the display let you know
if there are screens available above and/or below the presently displayed screen.
To exit the Setup Menu screens, press the MENU button repeatedly until you see the
Exit Setup Menu screen, shown on the following page. (The number of presses
required will depend on how deeply into the menu structure you have navigated.)
Then press the button below
Yes .
“Exit Setup Menu” Screen
Exit Setup Menu?
Yes No
Audio Setup
“Audio Setup” Screen
Setup Menu
Audio Setup
Press the ENTER button to select which parameter of the Audio Setup menu you
wish to view. From any of the parameter level menus, you can select a different
parameter by using the rotary quick-adjust knob on the front panel.
For example, pressing the ENTER button from the Audio Setup menu will display
one of the following parameters:
•
Input Compensation
•
Output Volume
•
Input Names
•
Output Names
30
•
Wideband RGB Matrix Switcher: CEN-RGBHV Operations Guide – DOC. 6612C