Crestron CEN-RGBHV, Руководство по эксплуатации

Страница: 25 / 56

Crestron CEN-RGBHV Wideband RGB Matrix Switcher
CAUTION: To prevent possible equipment damage, it is important to use the
correct value fuse in the correct position in the fuse holder. As you face the rear
of the CEN-RGBHV, the line (“hot”) fuse will be on the left side of the fuse
holder. This fuse should have a value of 2.5 Amps / 250 Volts. The neutral fuse
will be on the right side of the fuse holder and should have a value of 10 Amps /
250 Volts.
4. Inert the fuse holder in the CEN-RGBHV and push it inward until it clicks
into place.
5. Connect power to the CEN-RGBHV.
Label the Buttons Use Crestron Engraver software to print custom labels for the CEN-RGBHV’s front
panel buttons and LEDS. Crestron recommends printing on 100-pound paper. Paper
weighing less than 100 pounds will tend to crumple while sliding in, while paper
weighing more than 100 pounds may not fit.
Operations Guide – DOC. 6612C Wideband RGB Matrix Switcher: CEN-RGBHV
•
21