Crestron
INET-CBDEX Series
Cameo Keypads with infiNET EX
Operations & Installation Guide - DOC. 6992D
Cameo
Keypads with infiNET EX
•
17
Assemble the keypad as described in the following steps. Refer to the
accompanying illustration.
1.
Arrange the button caps in position on the rear housing assembly
according to the program plan.
NOTE
: A single button cannot be installed in the lowest position
of the keypad.
2.
Carefully position the bezel over the button caps on the rear
housing assembly.
Keypad Assembly (INET-CBDEX-P Shown)
Bezel
LED
Holes
LED
Light Pipes
Light
Sensor*
Screws (2)
#2-28 x 3/16"
3.
Install and tighten the two supplied 2-28 x 3/16” screws, as shown
in the illustration.
4.
Press each button and release to ensure that the button caps move
freely.
* INET-CBDEX-P only
