Cameo Keypads with infiNET EX
Crestron
INET-CBDEX Series
18
•
Cameo Keypads with infiNET EX
Operations & Installation Guide - DOC. 6992D
Use the following procedure to install the keypad in a standard,
1-gang electrical box (not supplied).
NOTE
: Installation must be in accordance with National Installation
codes.
1.
Turn ac power off.
2.
Connect the ac power cable to the line, neutral, and ground
INET-CBDEX screw terminals following all local and state codes.
CAUTION:
Excess wire pinched between the keypad and
electrical box could cause a short circuit. Make sure that all excess
wire is completely inside the electrical box and not between the
box and the keypad.
3.
Make sure the keypad is oriented properly (note the location of the
LED holes and light sensor*), place it in the electrical box, and
attach using the supplied 6-32 x 3/4" combo head screws.
* INET-CBDEX-P only
