manualshive.com logo in svg

Crestron Cameo C2N-CBF, Руководство по эксплуатации и установке

Поделиться
Скачать
Crestron Cameo C2N-CBF Скачать руководство пользователя страница 29

Crestron 

C2N/C2NI-CB Series

 Cameo

™

 Keypads

 

Crestron D3 Pro similarly offers automatic programming for lighting, 
HVAC, and security. 

Both Crestron SystemBuilder and D3 Pro are fully integrated with 
Crestron's suite of software development tools, including SIMPL 
Windows, VT Pro-e, and the Crestron Database. Both access these tools 
behind the scenes, enabling you to easily create robust systems. 

Programming with SIMPL Windows 

NOTE

: The following assumes that the reader has knowledge of SIMPL 

Windows. If not, refer to the extensive help information provided with 
the software.  

NOTE

: In the following description, the PRO2 control system is used. 

SIMPL Windows is Crestron's software for programming Crestron 
control systems. It provides a well-designed graphical environment with 
a number of workspaces (i.e., windows) in which a programmer can 
select, configure, program, test, and monitor a Crestron control system. 
SIMPL Windows offers drag and drop functionality in a familiar 
Windows

 environment. 

This section describes a sample SIMPL Windows program that includes a 
Cameo keypad.  

Configuration Manager is where programmers “build” a Crestron control 
system by selecting hardware from the 

Device Library

. In Configuration 

Manager, drag the PRO2 from the Control Systems

 

folder of the 

Device 

Library

 and drop it in the upper pane of the 

System Views

. The PRO2 

with its associated communication ports is displayed in the 

System Views

 

upper pane.  

PRO2 System View 

 

The 

System Views

 

lower pane displays the PRO2 system tree. This tree 

can be expanded to display and configure the communications ports.

 

Operations & Installation Guide - DOC. 6346A 

Cameo™ Keypads: C2N/C2NI-CB Series  

•

  25 

Содержание Cameo C2N-CBF

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды