manualshive.com logo in svg

Crestron Cameo C2N-CBF, Руководство по эксплуатации и установке

Поделиться
Скачать
Crestron Cameo C2N-CBF Скачать руководство пользователя страница 27

Crestron 

C2N/C2NI-CB Series

 Cameo

™

 Keypads

 

Programming Software 

Have a question or comment about Crestron software? 

Answers to frequently asked questions (FAQs) can be viewed in the 
Online Help section of the Crestron website. To post a question or view 
questions you have submitted to Crestron’s True Blue Support, log in at 
http://support.crestron.com. First-time users will need to establish a user 
account.

 

You can create a program that allows you to include the Cameo keypad 
in a Crestron control system using the Crestron programming tools 
Crestron SystemBuilder

™

 or D3 Pro and SIMPL Windows. These tools 

are intended for users with different levels of programming knowledge. 
The flexibility of each tool is proportional to the degree of programming 
expertise (i.e., the more flexible, the more a programmer needs to know 
and account for). Of course, one can initiate programming using the 
easiest method (SystemBuilder or D3 Pro) and use advanced techniques 
that are available from SIMPL Windows to customize the job. 

Earliest Version Software Requirements for the PC 

NOTE:

 Crestron recommends that you use the latest software to take 

advantage of the most recently released features. The latest software is 
available from the Crestron website. 

The following are the earliest useable software version requirements for 
the PC: 

• 

SIMPL Windows version 2.06.20 or later, plus Library Update 
352. Requires the following software versions: 

o  SIMPL+ Cross Compiler version 1.1. 

o Crestron 

Database 

version 17.3.3 or later.  

Operations & Installation Guide - DOC. 6346A 

Cameo™ Keypads: C2N/C2NI-CB Series  

•

  23 

Содержание Cameo C2N-CBF

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды