Crestron Cameo C2N-CBF, Руководство по эксплуатации и установке

Страница: 17 / 48

Crestron C2N/C2NI-CB Series Cameo
™
Keypads
Installation consists of connecting the unit to the Cresnet system, and
then mounting it directly to the mounting surface or to a back box,
depending on the keypad configuration.
The following items are required for all installations:
•
Cresnet network cable (not supplied)
•
No. 2 Phillips screwdriver (not supplied)
Flush Mounting Installation
The Cameo keypad for flush mounting installation is supplied partially
assembled along with several items as listed in the following table.
Supplied Parts/Assemblies – Flush Mounting
QTY ITEM DESCRIPTION
1 Rear housing and switch assembly Rear housing with switch circuitry attached
1 Bezel Bezel assembly
1 4-pin female mini network
connector Used to connect Cresnet network cable to the keypad
2 Screws, Black, Phillips pan head,
4-40 x 3/16” Used to attach the bezel assembly to the keypad rear
housing and switch assembly
6 Single row button cap Switch cover for a single row switch
3 Double row button cap Switch cover for two switches that function as one
2 Triple row button cap Switch cover for three switches that function as one
2 Single row spacer Switch cover for single non-operational switch
1 Double row spacer Switch cover for two non-operational switches
1 Triple row spacer Switch cover for three non-operational switches
1 Plastic button support Used to hold the button caps/spacers together in
position
1 Spring clamp Used to secure the assembled keypad in the wall
1 Template Used to mark correct hole size in the wall
Assemble the keypad as described in the following steps. Refer to the
accompanying illustrations.
1. Place the button caps and/or spacers in position according to the
program plan. Attach the plastic button support to the button
caps/spacers, and put the assembled parts in place on the rear
housing and switch assembly. (Refer to the illustration for the
standard mounting installation procedures, step 1, on page 16.)
2. Carefully position the bezel assembly, LED edge first, down
and over the button caps/blanks and rotate slightly into position
on the rear housing and switch assembly.
Operations & Installation Guide - DOC. 6346A Cameo™ Keypads: C2N/C2NI-CB Series
•
13