Crestron C2N-DBF12, Руководство по эксплуатации и установке

Страница: 11 / 28

Crestron C2N-DBF12 & C2N-DBN12 Decorator Keypads
Setup
Network Wiring
When wiring the network, consider the following:
•
Use Crestron
©
Certified Wire.
•
Use Crestron power supplies for Crestron equipment.
•
Provide sufficient power to the system.
CAUTION: Insufficient power can lead to unpredictable results
or damage to the equipment. Please use the Crestron Power
Calculator to help calculate how much power is needed for the
system (
http://www.crestron.com/calculators ).
•
For larger networks, Use a Cresnet Hub/Repeater (CNXHUB) to
maintain signal quality
For more details, refer to “Check Network Wiring” on page 20.
Identity Code
The Net ID of the C2NDBF/N12 has been factory set to 71 . The Net IDs
of multiple C2NDBF/N12 devices in the same system must be unique.
Net IDs are changed from a personal computer (PC) via the Crestron
Toolbox
™
. When setting the Net ID, consider the following:
•
The Net ID of each unit must match an ID code specified in the
SIMPL Windows program.
•
Each network device must have a unique Net ID.
For more details, refer to the Crestron Toolbox help file.
Installation
The following tools/hardware are required for installation.
•
Cresnet network cable (sold separately)
•
Phillips screwdriver (not supplied)
•
Two 1-in. pan head Phillips screws (supplied)
Operations & Installation Guide – DOC. 6200A Decorator Keypads: C2N-DBF/N12
•
7