manualshive.com logo in svg

Crest Audio CDVS-4200 Series, Руководство пользователя, Страница: 56 / 81

Поделиться
Скачать
Crest Audio CDVS-4200 Series Скачать руководство пользователя страница 56

7-20

Record (Setup)

Click the Setup button from the main record menu, the Record (Setup) window appears.

Set recording mode

Turn on/off Pre Alarm
Turn on/off Post alarm

Set motion area grid and sensi-

tivity

Overwrite HDD files when full

 

• Mode

 - There are two types of recording modes - continuous or schedule.

 

• Pre Alarm

 - Pre alarm will capture 200 frames of video before an alarm event. 

 

  The options are on or off.

 

• Post alarm

 - Post alarm will capture 200 frames after alarm. The options are on or off.

 

• Limit Days

 - Used to limit the number of days to maintain video. The system will erase all video 

 

   after this number of days. This is mainly used in European countries where the law only allows you 

 

   to keep a small number of days of video.  

 

• Motion Area Setup

 - This will bring up the motion area setup screen to mask areas to 

 

  Detect motion. 

 

• Overwrite

 - By checking this box, the system will overwrite the oldest recorded video file when the  

 

  full capacity of the hard disk storage is reached.

Limit Days

Содержание CDVS-4200 Series


















































































Отзывы:

Нет отзывов