4-2
Setting the ID on the remote controller
The controller ID can be set from 00-99; This is useful when there are two DVR in close proximity to each
other. The two controllers can be set to use two different ID so they will not interfere with each other.
The controller ID must be set in both the remote controller and the DVR. To set the ID on the controller, fol-
low the instructions below:
1) Push and hold the ID button until the red light stays on.
2) Enter the number on the numeric key pad you wish to set as the ID. To use 0-9 you must enter 0
in front of number. Example to set ID to 1, enter 01 in the controller.
3) Press the ID set button; the controller’s red light will blink 3 times and go off. The controller is
now set.
You must now set the ID in the DVR. This can be done using the front panel or the mouse. Follow the in-
structions below for setting the controller ID in the DVR:
1) If you have not logged into the DVR, do so now.
2) Push the menu button on the front panel or right click the mouse button. The menu screen
appears. Click Main Menu. (See Image below.)
Click main menu
