3-1
Powering Up The DVR For The First Time
The default settings of the 4200 series DVR will allow the DVR to begin recording in continuous mode after
all the hardware has been installed and the unit is powered on. The steps below will walk you through setting
the date and time for your unit.
After making all connections to the DVR, turn on the DVR by pushing the on/off button located on the front
panel of the DVR. The system will go through a series of self diagnostics and check disk after which, will
bring up the main screen.
Default User Name and Password
Click the right mouse button or press the menu button on the front panel or remote controller. This will
bring up the log in screen. The system default user is
administrator
and the password is
1234
. Input the pass-
word 1 2 3 4 and select OK. See image below.
