Creo Leaf Valeo, Руководство по установке

Страница: 105 / 143

56 Chapter 8 – Mamiya RB
Before Getting Started
This chapter describes the Leaf Valeo digital camera back installation as it
applies to the Mamiya RB
camera.
Items Required for the Installation
The following table describes the items you need to install the Leaf Valeo
digital camera back on a Mamiya RB camera. The items can be found in
the
Leaf Valeo with Hasselblad Mount Kit and in the Mamiya RB Interface
Kit . .
* available in the Mamiya RB Interface Kit
Note:
For Leaf Valeo 6 only—
The supported shutter speed is up to 1/60 with flash
lighting, and up to 1/15 with continuous lighting. For an unlimited shutter speed,
use the Kapture Group One-Shot Hand Release cable, which you can purchase
from your local dealer.
Important:
To avoid installation and operation problems, use only the
accessories supplied in the Leaf digital camera back kit.
Kit Contents Required for
Installation
Leaf Valeo digital camera back with Hasselblad mount Yes
Mamiya RB adaptor plate* Yes
Focusing screen mask* Yes
FireWire cable (4.5 m / 15 ft.) Yes
Leaf DM FireWire cable (25 cm / 10 in.) Yes
Leaf Capture V8 software CD Yes
Documentation (Leaf documentation CD and printed documentation) Yes
Cleaning supplies (isopropyl alcohol, cleaning wipes, tweezers) (keep on hand)
Diffusion filter
No
Gray card (18%) No