7
Digital Output Connector
The Digital Output connector allows your CD-ROM drive to provide
digital output for recording to a digital audio tape (DAT) or
professional audio recording system. This connector follows the
EBU-IEC958 standard set by the European Broadcast Union.
CD Audio Connector
The CD Audio connector allows you to direct audio output from your
CD-ROM drive to your audio card when connected using a CD Audio
cable.
Master/Slave Jumper
The Master/Slave jumper (see Figure 6) allows you to set your drive
as the Master or Slave drive. When you connect more than one drive,
you must set your drive to be either a Master or Slave drive (see the
section “Connecting Additional Drives” in Chapter 4 of the
User’s
Guide
). CS is reserved and should not be used.
Figure 6: Master/Slave Jumper.