Yorktown Play Floor - 19795-200B (04/20)
Copyright 2010, Creative Playthings - Printed in U.S.A.
Page 2
Page 2
STEP THREE – Reinstall Sandbox
STEP ONE – Preparation
STEP TWO – Install Transition
A
A
Sandbox
Back.
Remove
and keep at
hand.
Middle
Post
Sandbox
Center. Re-
move and
dispose.
Fasten the Floor Transition (A) to each middle post
through the bottom hole using 5/16 x 4" Hex Bolt as-
semblies as shown.
A Hex bolt assembly consists of a Hex Bolt, Lock Wash-
er, Flat Washer, and Weld Nut.
Align the transition so the holes at the end of the part
are closest to the bottom edge.
Restore the Sandbox Backs to the original positions us-
ing the original hardware. Please note: there is only a
place for one lag screw to secure the end of each part.
Using a putty knife or other flat blade, carefully remove
the hole caps covering the central holes on the sandbox
front of the porch section of the Yorktown gym. Save the
hole caps for later use.
Drill 3/8" diameter holes through the center of the 1"
counter-bores in the positions shown at right.
Remove the Sandbox Center, it won't be needed. Re-
move the Sandbox Back boards at each end of the
porch base. They will be reinstalled. Save all fasteners
for later use.
5/16 x 3"
Lag Screw
(removed
earlier)
5/16 x 4"
Hex Bolts
(removed
earlier)
5/16 x 4"
Hex Bolts
