Assembly
MODEL PS10FRA
19766-100 Rev B (05-10)
© Copyright 2010, Creative Playthings. Printed in U.S.A.
3DJH
PRE ASSEMBLY INFORMATION
&5($7,9(3/$<7+,1*63/$<6(7686($)(:67$1'$5'&211(&7,216
BECOMING FAMILIAR WITH THESE CONNECTIONS WILL SIMPLIFY ASSEMBLY AND
INSURE A SAFER PLAY PRODUCT FOR YOUR CHILDREN.
+H[%ROW :HOG1XW$VVHPEO\3URFHGXUH
Assembly Layout:
Align the holes in the parts to be fastened. Start
preliminary tightening of bolt into weld nut by
hand. Tighten each bolt with a wrench until the
lock Washer is fully compressed between the
KHDGRIWKHEROWDQGWKHÁDW:DVKHU
Correct Assembly:
Bolt has been screwed securely into weld nut
and the connection is tight. Check connec-
tions periodically for tightness during the life
of the Playset .
Do not over tighten.
Incorrect Assembly:
During assembly or maintenance the bolt pro-
trudes 1/8" past the weld nut. Call customer
service or replace the bolt at a local hardware
store. You may be overtightening or using the
wrong size bolt.
Failure to replace this bolt with a shorter
one could result in serious injury.
Typical Installation - Lag Screws:
3LORWGULOOZLWKWKHDSSURSULDWH
diameter drill bit and then use
a socket to tighten.
'2127RYHUWLJKWHQ
Typical Installation - Wood Screws:
8VHDQHOHFWULFGULOORUVFUHZJXQWRGULYHVFUHZV
'ULOOSLORWKROHVZKHUHUHTXLUHG
:HUHFRPPHQGWKDW\RXOXEULFDWHWKH
threads of the screws with beeswax or
soap to ease installation and minimize
breaking screws.
It is very important to make cer-
tain that the tops of all screws are
ÁXVK ZLWK WKH VXUIDFH RI WKH ZRRG
and there are no protruding sharp
edges.
