
48
eng
Li
Sh
49
eng
Li
Sh
SoFTWARE iNSTALLATioN FoR WiNDoWS
SoFTWARE iNSTALLATioN FoR WiNDoWS /// SoFTWARE iNSTALLATioN FoR MAC
installation of the cLX.PayPen driver software (for Windows 2000):
The input Pen and CLX.PayPen are installed automatically. No user action is required.
installation of the cLX.PayPen driver software (for Windows 7, Vista, XP):
• The wizard for finding new hardware is run twice in a row.
• The first run applies to the input Pen; the second, to the CLX.PayPen.
• The run-throughs consist of the following dialogs (example applies to Windows XP and
input Pen recognition).
Dialog 1
Dialog 2
Dialog 3
Dialog 4
dialog 5
troubleshooting (applies to all operating systems)
• if the installation programme does not start, simply click on Start on the Taskbar and select
Run. in the open field type x:\setup (x stands for the location of your CD-RoM drive).
• if your computer prompts you for drivers, you have probably connected CLX.PayPen
without first installing the software on the enclosed Cd-RoM. disconnect CLX.PayPen,
install the software and reconnect CLX.PayPen.
• USB extension cables can disrupt the proper operation of the CLX.PayPen or even pre-
vent operation altogether (light from the CLX.PayPen is switched on only briefly if at all).
Make sure you only use uSB extension cables of the finest quality.
• Always connect the CLX.PayPen to the same USB port. if the CLX.PayPen is connected to
another uSB port, some systems might recognise the CLX.PayPen again as new hardware
and require the installation with the hardware wizard to be repeated.
Please visit www.crealogix.com for further support information concerning trouble-
shooting.
SoFTWARE iNSTALLATioN FoR MAC
you have to install the software located on the enclosed Cd-RoM before connecting your
CLX.PayPen to your Macintosh computer.
1. insert the CD-RoM in the CD-RoM drive of your Mac.
2. Start the installation program CLX.PayPen.mpkg
follow the instructions appearing on the screen.
3. When installation is completed, a message to this effect will appear on the screen.
4. Use a USB port to connect the CLX.PayPen to the Mac.
5. Start the CLX.PayPen application by double-clicking on the CLX.PayPen icon in the Pro-
grams/CLX.PayPen folder.