CRE I4GEN, Техническая документация инструкция, Страница: 32 / 45

TECHNICAL DOCUMENTATION
32
A56V1_90020_D_EN
Static configuration pages
Static configuration part allows user to display and modify connected controller parameters.
Press configuration icon to open the menu that gives access to all configuration pages
(see
image below).
Modification by variable number
To change the value of a variable:
1.
Enter the number of the variable you want to change in the "Variable number" input field.
2.
Enter the value you want to write in the "Value" input field.
3.
Press "Send" button to send the change to the controller.
A popup window appears to inform you of the writing result. The different possible cases are the following
Writing was successful
Writing failed
Writing seems to have been successful but the i4Gen could not verify the written value. In this
case, you can go to the "Information" supervision page to double check if the value had been written
or not.