CRE I4GEN, Техническая документация инструкция, Страница: 22 / 45

TECHNICAL DOCUMENTATION
22
A56V1_90020_D_EN
Bargraph
This is the graphical object used for mechanical measures and whose representation of the measure in
relation to a minimum and a maximum is important:
Note: The slider is the value of the measurement relative to the min and max shown below the bar-graph.
User configuration reminder
The protection levels configured for the measurement associated with the bar graph are directly represented
on the bar graph:
Representation of a minimum protection threshold configured as an alarm.
Representation of a maximum protection threshold configured as a fault.
It is possible to display up to 2 max and 2 min protection thresholds per
bargraph.
If none protection is configured, no threshold will be displayed on the bargraph.
Bargraph states
Nothing to report : When the cursor remains outside
the alarm/fault ranges OR no protection threshold has
been configured, the background of the bargraph is
colored with the selected theme and the numeric value
on the left side of the bar graph is white colored.
Alarm active: When the cursor overlaps an alarm
range and the associated protection has been triggered
on the controller, the bargraph and its numeric value
turn into orange color.
Active fault: When the cursor overlaps a fault range
and the associated protection has been triggered on
the controller, the bargraph and its numerical value turn
into red color.