6
Crathco
®
Simplicity Bubbler
1.
3.
4.
5.
Install pump cover.
Place o-ring on dispense valve
(check if nicked or twisted).
Place in bowl.
Install assembled bowl.
Machine must be OFF.
Insert bowl lip underneath
of lock position on the
back of top tray.
Then, press down on the
front of the bowl until
you hear a click indicating
the bowl is locked proper-
ly in place.
6.
7.
8.
9.
10.
11.
12.
Install spray tube to fit
with Pump cover.
Install handle.
Flip out support bracket
for drip tray.
Install drip tray and cover.
Mix product in clean container.
Fill bowl with product.
Install bowl cover.
Turn power “on”.
Installation - Spray Function
b.
a.
b.
2.
Install mixing impeller.
Install bowl gasket.
CAUTION/ ATENCIÓN/
ATTENTION
Sharp edges can
cause personal injury. Handle
with care.
Replace bearing sleeve if
flange thickness is less than
0.75mm
(0.03 inch) thick.
Replace impeller if
bearing surface is
worn more than
0.5mm (0.02 inch).
Inspect for wear.
a.
NOTICE/ AVIS/
AVISO:
