Simplicity Bubbler
Crathco
®
5
Installation - Agitator Function
1.
2.
4.
3.
5.
7.
8.
6.
9.
10.
Install mixing impeller.
Install bowl gasket.
Place o-ring on dispense valve
(check if nicked or twisted). Place in
bowl.
Install assembled bowl.
NOTICE:
Machine must be OFF.
Insert bowl lip underneath
of lock position on the back
of top tray.
Then, press down on the
front of the bowl until
you hear a click indicating
the bowl is locked proper-
ly in place.
Install handle.
Flip out support bracket for
drip tray.
Place drip tray
cover on drip
tray.
Install drip tray.
Mix product in clean container.
Fill bowl with product.
Install bowl cover.
Turn power “on”.
a.
b.
a.
b.
CAUTION/ ATENCIÓN/
ATTENTION
Sharp edges can
cause personal injury. Handle
with care.
Replace bearing sleeve if
flange thickness is less
than 0.75mm
(0.03 inch)
thick.
Replace impeller if
bearing surface is
worn more than
0.5mm (0.02 inch).
Inspect for wear.
NOTICE/ AVIS/ AVISO:
