Crane Dixie-Narco 504 P Series, Техническое руководство

Страница: 19 / 99

PROGRAMMING P-SERIES
Page 19 of 99
feature on. To move to “FREE” - Free Vend, press & hold select buttons 1 & 2 simultaneously with this
feature off.
LT – Lighting available only when Environmental Controls are set to on.
This function is used to turn the lights off during certain periods of the day. To enter the sub-menu press
select button 1. The following are sub-menus of the Light Menu:
“DAYS” , ( STRT ) “Start”, “STOP” ,
( ENAB ) “Enable”, and ( RTN ) “Return”. To move to Refrigeration (“ RFRG” ), press & hold select buttons 1
& 2 simultaneously.
Pressing select button 1 will enter “DAYS” .
DAYS
This function is used to set the days of the week to turn lights off.
Day of the week:
(
SUN ) Sunday ( WED ) Wednesday ( SAT ) Saturday ( RTN ) Return
( MON ) Monday ( THUR ) Thursday ( ALL ) All Days
( TUE ) Tuesday ( FRI ) Friday ( NONE ) No Days
Press select button 1 and "MON#” will show on the display, where # is “0” (disable) or “1”
(enable). Press and hold select button 1 to toggle between “0” and “1” . Release the select
button with the display showing the setting you wish to use. Press select buttons 1 & 2
simultaneously to scroll through all available days,
“ALL”, “NONE” , and “RTN” . Press select
button 1 at the “RTN” prompt returns to “DAYS” .
Press & hold select buttons 1 & 2 simultaneously to move to the next item on the menu.
STRT - Start
This function is used to set the hours and minutes to start lighting routine.
Press select button 1 and the current four-digit hour and minute setting will be displayed.
(24 hour).
Press & hold select button 1: Set Hours
Press & hold select button 2: Set Minutes
Press select buttons 1 & 2 simultaneously to move to the next item on the menu.
STOP
This function is used to set the hours and minutes to stop lighting routine.
Press select button 1 and the current four-digit hour and minute setting will be displayed.
(24 hour)
Press & hold select button 1: Set Hours
Press & hold select button 2: Set Minutes
Press select buttons 1 & 2 simultaneously to move to the next item on the menu.
ENAB - Enable
This function is used to allow the lighting routine to go in to affect.
Press select button 1 and the current setting will be displayed (
ON or OFF ).
Press and hold select button 1 to toggle between “ON” and “OFF” .
Release the select button showing the setting you wish to use and display will return to “ENAB” .
Press select buttons 1 & 2 to scroll to “Return”.
RTN - Return
Press select button 1 to return to “LT” .
Press & hold select buttons 1 & 2 simultaneously to move to the next item on the menu.