Crane Dixie-Narco 504 P Series, Техническое руководство

Страница: 18 / 99

PROGRAMMING P-SERIES
Page 18 of 99
SEC – SECONDARY PRICING
This function is used to program a second price for each selection. To move to Environmental Controls
(“
ECTL” ), press & hold select buttons 1 & 2 simultaneously. To enter the sub-menu press select button
1. The following are sub-menus of the Secondary Price Menu: ( S-P2 ) “Price”, “Days”, ( STRT ) “Start”,
“STOP” , and ( RTN ) “Return”.
S-P2 - Price
This function is used to set the price of each selection. When a select button is pressed, the price
For that selection will be displayed. If the button is held in, the price will increment or decrement.
To change from increment to decrement, release the select button and press it again.
Note: The SBC multi-pricing capability allows you to set all selections to any price in the range
of $0.00 to 99.95.
Press & and hold select buttons 1 & 2 simultaneously to move to the next item on the menu.
DAYS
This function is used to set the days of the week to be affected by secondary pricing.
Day of Week:
(
SUN ) Sunday ( WED ) Wednesday ( SAT ) Saturday ( RTN ) Return
( MON ) Monday ( THUR ) Thursday ( ALL ) All Days
( TUE ) Tuesday ( FRI ) Friday ( NONE ) No Days
Press select button 1 and
“MON” will show on the display, where # is “0” (disable) or “1”
(enable). Press and hold select button 1 to toggle between “0” and “1” . Release the select
button with the display showing the setting you wish to use. Press select buttons 1 & 2
simultaneously to scroll through all available days,
“ALL” , “NONE” , and “RTN” . Pressing select
button 1 when “ALL” is displayed will cause the display to change to “ON” when all days have
been enabled. Pressing select button 1 when “NONE” is” displayed will cause the display to
change to “off” when all days have been disabled. Press select button 1 at the “RTN” prompt
returns to “Days”.
Press & hold select buttons 1 & 2 simultaneously to move to the next item on the menu.
STRT - Start
This function is used to set the hours and minutes to start secondary pricing. Press select button
1 and the current four-digit hour and minute setting will be displayed. Press and hold select button
1 to change the hour setting, press button 2 to change the minute setting.
Press select buttons 1 & 2 simultaneously to move to the next item in the menu.
STOP - Stop
This function is used to set the hours and minutes to stop secondary pricing. Press select button
1 and the current four-digit hour and minute setting will be displayed. Press and hold select button
1 to change the hour setting, press button 2 to change the minute setting.
Press select buttons 1 & 2 simultaneously to move to the next item in the menu.
RTN - Return
Press button 1 to return to Secondary Pricing ( “SEC” )
Press buttons 1 & 2 to scroll to the next item in the menu
ECTL – ENVIRONMENTAL CONTROLS
This allows the user to view the energy conservation menu “LT” - “Lighting”, “RFRG” – “Refrigeration”,
and also the “RLY” - “Relay” test menu. When this is programmed to “Off” you will not see (LT),
(RFRG) or (RLY). Press select button 1 and the current setting will be displayed ( ON or OFF ). Press and
hold select button 1 to toggle between “ON” and “OFF” ( This feature is “On” from the factory on P-
Series machines). To move to “LT” Light, press & hold select buttons 1 & 2 simultaneously with this