8
Wire Size -
If additional cable is required consult a
qualifi ed electrician for proper wire size.
CABLE CONNECTIONS:
Power/Control Cable-
Insert female end of cable plug into
housing bore aligning alignment mark with hole in terminal
block see Figures 3 & 4. Tighten bolts on compression
fl ange until fl ush with motor housing.
Pump Power - Large Pin
Level/Control - Small Pin
Level control cord has molded fi tting at both ends of the
cord. Install one end to the Pump and the other end to the
Level Control.
FIGURE 3 - PGPT1022C
FIGURE 4 - Automatic Pumps
PGPT1022C
