Crane 99481, Руководство пользователя

Страница: 8 / 23

14 15
NOTICE!
Please note that the right
pedal screws on clockwise and
the left pedal counter clock-
wise.
4. Fasten the seat
7
to the seat pillar
3
using 3 hex head screws
19
and 3
washers
15
, and then insert it into the
front main frame
1
. Position the
holes above one another and then
fasten the seat to the pillar using the
club knob
9
. The club knob
9
can
be used to set the correct seat height
(see Fig. E)
.
WARNING!
Risk of injury!
The mark MAX
A
on the seat
pillar must be completely visible
at MAXIMUM height
(see
Fig.
E)
.
NOTICE!
Setting the correct seat height
is important. Sit on the seat
and place your feet on the
pedals. You should be able to
move through a complete
pedal stroke without locking your knees or shifting your hips on
the seat. The seat is too close to the pedals if you have more than
a slight bend in your knees at the bottom of the pedal stroke. The
seat is too far from the pedals if you have to completely straight-
Assambling Assambling
children, protruding into or
located in the movement area,
which could influence the
training or cause injuries. We
recommend a safety distance
of 59” x 59” (150 cm x 150 cm)
around the unit. Leave or store
the X-Bike so that children
cannot injure themselves.
Assembling
Setting up the X-Bike
CAUTION!
Risk of injury!
Improper set-up and
use of the X-Bike may
result in injury.
− When setting up the X-Bike,
make sure not to squash
your fingers.
1. Pull out the safety pin
10
(see Fig. B)
and then reinsert it into the appropri-
ate hole after fully unfolding the
product (see Fig. B) .
2. Fasten the front stand, which has
transportation wheels attached
5
to the front main frame
1
using 2 carriage
bolts
11
, 2 curved washers
16
and 2 M8 hex nut caps
18
. Then fasten the rear
stand
6
to the rear main frame
2
using 2 carriage bolts
11
, 2 curved washers
16
and 2 M8 hex nut caps
18
(see Fig. C) .
3. The left and right pedals (
8L
and
8R
) are marked with “L” and “R” respectively.
Mount the pedals to the corresponding cranks. When you are sitting on the bike,
the right
8R
pedal is on your right
(see Fig. D)
.
1
18
2
18
18
16
16
16
6
5
11
11
C
1
10
10
10
B
1
21L
8R
8L
21R
D
1
9
15
19
3
7
A
E