Crane Source Spacevector SV200, Руководство пользователя

Страница: 33 / 112

33
• This procedure is the same for the Service Level.
2.2.4 Viewing all Functions within a Group Level
Fig. 2.2.3: Programming flow chart showing how to view all function [Code No’s.] of a
group level.
ADV Drive
01 Manual
ADV Freq. Set
02 Key
ADV Energy
03 80 %
ADV Rev Plug
91 1.5 Sec.
ADV Jump
00 12
ADV Jump
00 12
•
•
•
MODE
In this example, the user is currently located in the
Advanced Level at Code No. 00.
•
Press the UP key once. This will take you to
Drive Mode [ADV: Code No. 01].
•
Press the UP key again to go to
Freq. Set [ADV: Code No. 02].
•
Press the UP key again to go to
Energy Save [ADV: Code No. 03].
•
Keep pressing the UP key and observe each
[Function Code No.] as you go along. Use
Table 2.2.1 for reference.
•
Once you scroll to the last [Function Code No.] of
the level you are in, the program will stop
scrolling. To get back to [Function Code No. 00]
either press the DOWN key and scroll backwards,
or press the MODE key. In this example the last
code number in the Advanced Level is Rev. Plug
Dec. [ADV: Code No. 91].
For more information contact: Sievert Crane and Hoist, (708) 771-1600, parts@sievertelectric.com, www.sievertcrane.com