manualshive.com logo in svg

Crane Merchandising Systems Merchant 180, Руководство оператора

Поделиться
Скачать
Crane Merchandising Systems Merchant 180 Скачать руководство пользователя страница 46

Final Checkout

Merchant™ Operators’ Guide

January 2008

38

1810006

Final Checkout

Now, you have connected your merchandiser to the utilities, placed it in its final location, loaded it 
with products, and set the prices. Before you lock the door and move on, you should check to see if 
your merchandiser will vend products. In case of problems, perform the operational readiness 
checks beginning on this page.

1.

Press 

 and 

. The display shows the manufacturing setup. Press 

 until

 

Test Vend

 is highlighted, then press 

 to select.

2.

Deposit coins and/or currency to establish credit higher than the price of the selection.

 

The display shows 

TEST.XX

 .

  

“

XX

” is the amount of credit you established.

3.

Use the selection switch panel to enter the selection number you want to vend. The display 
shows 

PRICE.XX

 . 

 “XX

” is the price of the selection.

 

The selection is vended, then correct change and the credit are returned.

4.

Test vend other selections, if desired.

1.

Perform test vends on all selections.(

See “Test Vend a Selection” on page 61.

)

2.

Do any of the snack or candy products catch on the tray and fail to vend? If not, skip to step 3.

 

If so, perform the following procedures on the affected areas until all products vend properly:
a. Install and/or adjust a product spacer. (

See “Installing and Removing Product Spacers” on 

page 24.

) 

b. Install a product pusher. (

See “PRODUCT PUSHER USAGE” on page 27.)

c. Install and/or remove spiral wall retainers.(

See “SPIRAL WALL RETAINER USAGE” on 

page 26.)

d. Perform the appropriate spiral anti-hang-up procedure(s) (

See the “Spiral Indexing Proce-

dures” on the next page.)

3.

Test the operation of the coin mechanism (

See “Setting Up and Loading the Coin Mechanism” 

on page 37

 for the proper procedure.)

4.

Test the operation of the bill validator.

(See “Testing the Bill Validator” on page 40.)

5.

Return all test vended products to the trays.

Test Vend Selections

Operational Readiness Check

+

_

Содержание Merchant 180











































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды