Crane Merchandising Systems Merchant 180, Руководство оператора

Страница: 34 / 170

Initial Setup Merchant™ Operators’ Guide
January 2008 26 1810006
Loading Trays with Product (continued)
• To install a spiral wall retainer, insert the retainer in the square slot near the front of the
column divider.
• The spiral wall retainer must be removed in two cases:
- A Kit Kat bar loaded into either of the two right hand positions of a tray will not clear the
retainer on the column divider between the two positions.
- A product pusher will catch on a retainer in ORIENTATION A.
SPIRAL
WALL
RETAINER
SPIRAL WALL RETAINER USAGE
A spiral wall retainer serves to compress the spiral and make it act like a
spring to more forcefully eject a product. Do some test vends and use a
spiral wall retainer when a product does not readily leave the spiral.
• Use a spiral wall retainer in the following cases:
- The spiral has a capacity of 20, 25, 30, or 38.
- The product is thin.
- The product is on a candy tray.
• The spiral wall retainer can also be used with other spirals and types of
products.
• The spiral wall retainer is installed near the front of the column divider.
There are two ways to install the spiral wall retainer.
ORIENTATION A
DIVIDER
ORIENTATION B
RETAINER
ORIENTATION
A B
COLUMN
DIVIDER
BETWEEN
THESE
POSITIONS
0 and 1 1 and 2
2 and 3 3 and 4
4 and 5 5 and 6
6 and 7 7 and 8
8 and 9