12
Crane
Electronics Ltd
The force in torque management
Crane Electronics Ltd
Watling Drive
Sketchley Meadows
Hinckley LE10 3EY
Tel: +44(0) 1455 25 14 88
www.crane-electronics.com
Check torque with digital display:
Activate the tool, ensure that all safety precautions are being followed. Take note of potential pinch points
when handling the tool during calibration testing.
After the tool stalls, the peak reading will momentarily appear on the display module, and then is saved. For
the next cycle it is important to reverse the tool and loosen the run down fixture.
NOTE: The default setting for the torque reading is peak. To take a peak reading, ensure that the “Peak” icon
appears under the torque reading on the display module (see image below).
Power
– Turns the display unit Off and On and also zeros the transducer.
Menu
– Accesses torque units and filter settings.
Left & Right Keys
– Navigate through the menu and allows access to stored
readings.
FIXED ICONS
OPERATION
