4
Applicable in the EU and other European Countries with separate collection systems
The symbol shown here and, on the product, means that the product is classed as Electrical
or Electronics Equipment and should not be disposed with normal commercial waste at the
end of its working life.
The Waste of Electrical and Electronics Equipment (WEEE) Directive (2012/19/EU) has been put in place to
recycle products using best available recovery and recycling techniques to minimise the impact on the
environment, treat any hazardous substances and avoid the increasing landfill.
To enable this product to be disposed of properly i.e., cradle to grave, Crane Electronics is willing to accept the
return of your product (at your cost) for recycling or alternatively, for more detailed information about
recycling of this product please contact your local authority or the Distributor / Company where you have
purchased the product.
Battery disposal to take place in line with the AMENDED BATTERIES DIRECTIVE 2013/56/EU. Batteries must
not
go to landfill. Check with local legislation.
Crane Electronics declares that this product does not contain any of the 191 Substances of Very High Concern
(SVHC’s) identified in the REACH Regulation in used articles make-up.
In Countries outside the EU:
If you wish to discard this product, please contact your local authorities and ask for the correct way of disposal.
Signed for & on behalf of
Crane Electronics Ltd.
Name:
B. M. Etter
Title:
Safety & Environmental Advisor
Signature of Issuer:
This manual covers the Tool Control Interface (TCI) working with a WrenchStar Multi (WSM) using RF.
Actual screen shots represented in this manual may differ slightly depending on version.
For information on the operation of a WrenchStar Multi please refer to its own manual.
PRODUCT DISPOSAL
ABOUT THIS MANUAL
WARNING
Changes or modifications to the Tool Control Interface (TCI) Multi
not expressly approved by Crane Electronics Ltd
could void the user’s authority to operate the equipment.
