21
The TCI base address should be set between 1 and 65353.
Each TCI should be given a unique base address so that WrenchStar Multi’s Paired with a particular TCI will
only communicate with that TCI and no other.
The RF power typically gives the following ranges:
0 = 1m
1 = 4m
2 = 9m
3 = 14m
(Default = 3)
The RF channels refer to the 1MHz frequency band in the region 2400 to 2480MHz and can be 0 to 79.
Channel 80 is reserved for Pairing. It is recommended that TCI’s which are used in close proximity should be
allocated different channels.
During Pairing the TCI will allocate a unique ID to each Paired device, the next one available being shown on
the Web Page. The TCI will only remember 5 Paired devices.
It is recommended that you only Pair one WrenchStar Multi and TCI at a time to avoid confusion and keep
them as close as possible when Pairing.
