cramZ 900-R, Руководство по установке

Страница: 9 / 20

In
fo
rm
ation
su
b
je
cts
to
c
ha
ng
e
w
itho
ut
n
o
ti
ce
.
4 900-R Setting
4.1 RF Channel Setting
900-R Installation Manual
900-R supports 10 different hopping schemes (CH0 ~ CH9), which MUST be set to the same
number as the 900-PRIME that communicates with this module. DIP switch SW1 is used to
set the channel.
SW1-S3 SW1-S4 SW1-S5 SW1-S6
CHANNEL
OFF OFF OFF OFF CH0
ON OFF OFF OFF CH1
OFF ON OFF OFF CH2
ON ON OFF OFF CH3
OFF OFF ON OFF CH4
ON OFF ON OFF CH5
OFF ON ON OFF CH6
ON ON ON OFF CH7
OFF OFF OFF ON CH8
ON OFF OFF ON CH9
4.2 RF VID Setting
Figure 4-1 RF Channel Setting
The RF module MUST be set to the VID number that is the same as the 900-PRIME that it
communicated with. This setting is done by S5 of DIP switch SW3.
SW3-S5 VID
OFF 0
ON 1
Figure 4-2 RF VID Setting
4.3 RF Power Setting
To get an effective transmit range, 2 power levels (500mW or 1W) are selectable for the RF.
The 1W power setting will result in longer ranges.
S8 of SW3 is to setting RF power level.
SW3-S8 Power Level
OFF 500mW
ON 1W
Figure 4-3 RF Power Setting
5