cramZ 900-R, Руководство по установке

Страница: 10 / 20

In
fo
rm
atio
n
su
b
je
cts
to
c
ha
ng
e
w
itho
ut
n
o
ti
ce
.
900-R Installation Manual
4.4 RF Address Setting
The host end module 900-PRIME can work with one or two 900-Rs. Unit 1 and unit
2
MUST be set to different address from each other. This setting is done by DIP
setting switch SW3.
SW3-S1 SW3-S2 SW3-S3 ADDRESS
OFF OFF OFF #0
ON OFF OFF #1
4.5 Input Setting
Figure 4-4 RF Address Setting
Factory default of these units are Unsupervised. This selection can be changed to Supervised
by setting S7 of SW3 to “ON”.
SW3-S7 Input type
OFF Unsupervised
ON Supervised
4.6 Reader Power Setting
Figure 4-5 (Un) Supervised Input Selection
A built in reader interface on 900-R can support 5Vdc (100mA) or 12Vdc (100mA) reader.
Jumper S3 is for reader power selection.
Setting Description Function
ON / Closed 5Vdc to Reader
OFF / Open 12Vdc to Reader
Figure 4-6 Reader Power Setting
6