TELL-ONE
CRAMARO TS S.r.l. – 37044 COLOGNA V.TA (VR), ITALY - VIA QUARI DESTRA, 71/G TEL. +39 0442/411688 / FAX + 39 0442/411690
E-MAIL [email protected] WEB : http://www.cramaro.com - Manual no. MTO001-EN-ED 02 – date 26/07/13
Page 16
Tarpaulin removal and reassembly
If replacing the tarpaulin, comply with the following instructions:
☯
COMPLETELY UNROLL the TARPAULIN and hook it to the rear retainers.
☯
As shown in Fig. 9 COMPLETELY REMOVE tension from the spring by inserting a
screwdriver inside the slot on the side of the housing.
☯
PULL OUT the tarpaulin making it slide along the relevant slot which holds it on the rolling
up tube located inside the housing and using the cut on the side of the housing itself.
☯
REPLACE THE TARPAULIN and reassemble it by inserting it in the aforementioned slots.
☯
PROCEED with the TENSIONING and adjustment of the tarpaulin recall spring as
indicated in the previous paragraph.
OBLIGATIONS OF INSTALLERS OR OF THOSE DELIVERING THE MACHINE TO THE END
USER
The person who delivers a machine to the end user must carry out the following steps:
-
Provide training on the machine for the user (or appointed user).
-
Provide the CE Declaration of Conformity to the end user.
-
Provide the manual/control register to the user.
How is training provided to the end user?
Explain the considerable importance of the following steps:
-
identifying the machine (CE plate).
-
thoroughly know the individual machine parts and their specific function and use.
Adequately inform the user about the following aspects:
-
existing hazards while using the machine;
-
strictly prohibited operations;
-
allowed intended use and not allowed, improper use of the machine;
Adequately inform the user about the following:
-
operation of the machine by conducting some operating cycles;
-
how to carry out work allowed by the manufacturer to solve any inconveniences that may occur;
-
conduct routine maintenance on the machine;
-
that it is advisable to have the tarpaulin sent to the installer EVERY YEAR to conduct extraordinary
maintenance;
-
that the control register must always be updated.
Constantly stress that:
-
all the information provided during the training session may be referred to again through the use and
maintenance manual which the user is required to read. The user must read it in its entirety before using the
machine for the first time.
-
if the vehicle or the container on which the tarpaulin is installed is sold, the user must:
•
teach the new owner how to use the machine;
•
give this manual/control register to the new owner.
•
give the original CE Declaration of Conformity by CRAMARO TS to the new
owner.
