Craftsman CMXGZBF7124441 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 36

background image

EnglIsh

10

Step 8: (fig. 26)

1. Assemble the large 1/2" washer (Q) onto the channel

pivot pin (6).

2. Attach the channel assembly to the tractor by placing

the end of the channel assembly up inside the pivot
support bracket on the tractor. Align hole (a) in the
channel assembly with the hole in the pivot support
bracket. Insert the channel pivot pin through the
aligned holes from the left side, and secure it with a
hairpin cotter (W).

HAIRPIN

COTTER (W)

CHANNEL

PIVOT PIN (6)

1/2" WASHER (Q)

CHANNEL

ASSEMBLY

HOLE (a)

Fig. 26

Step 9: (fig. 27)

1. From the left side, insert the welded end of the lift

handle rod through the hole in the end of the channel
assembly (Figure 27). Next, insert the lift link pin
through the hole in the bracket that is welded to the
lift handle rod. (The lift link is pre-assembled to the
pivot support bracket). Secure the bracket with a
hairpin cotter (W) inserted up through the lift link pin.

2. Apply a light coating of oil to the straight upper portion

of the lift handle rod. Slide the lift handle tube (20)
onto the rod (21).

LIFT HANDLE ROD (21)

HAIRPIN COTTER (W)

LONG PIN

(LIFT LINK)

WELDED BRACKET

LIFT HANDLE TUBE (20)

Fig. 27

Step 10: (fig. 28)

1. Remove the rubber cap and the first jam nut from the

threaded end of the control cable and slide them onto
the control cable wire. Adjust the second jam nut on
the threads so that it is approximately 3/4" from end.
Assemble threaded end of cable through the cable
mount bracket. Mount the bracket and secure it with
the first jam nut. Reinstall the rubber cap onto the
threaded cable end.

nOTE:

Some adjustment of jam nuts may be required after

blade assembly is completed.

RUBBER
CAP

CABLE MOUNT BRACKET

JAM NUTS

3/4"
CONTROL CABLE END

Fig. 28

Step 11: (fig. 29)

1. Assemble plastic grip onto lock release grip assembly.
2. Attach lock release grip assembly to lift handle tube

using one 5/16" x 1 - 1/2" hex bolt (C) and one 5/16"
nylock nut (L).

Do not overtighten

the nylock nut.

The grip assembly must pivot freely.

3. Assemble the ball end of the cable to a cable end

fitting as you did to the other end of the cable.
Secure the cable end fitting to the weld bolt on the
lock release grip with a 1/4" nylock nut (K).

Do not

overtighten

the lock nut. The cable fitting must pivot

freely.

5/16" x 1-1/2"

HEX BOLT (C)

PLASTIC

GRIP (8)

LOCK RELEASE

GRIP ASSEMBLY (9)

1/4" WELD

BOLT

CABLE END

FITTING

5/16" NYLOCK

NUT (L)

1/4" NYLOCK

NUT (K)

CABLE (22)

CABLE END

FITTING

Fig. 29

«
...
10
11
12
13
14
...
»

Содержание CMXGZBF7124441





































Отзывы:

Нет отзывов

Похожие инструкции для CMXGZBF7124441

Бренд: DAPU Страницы: 4

Бренд: Hama Страницы: 2

Бренд: Bachmann Страницы: 2

Бренд: Jetter Страницы: 4

Бренд: K&K Страницы: 8

Бренд: K&K Страницы: 20

Бренд: K&K Страницы: 6

Бренд: K&K Страницы: 3

Бренд: K&K Страницы: 3

Oakville Series

Бренд: Napoleon Страницы: 72

Бренд: Napoleon Страницы: 4

Allure Vertical Series

Бренд: Napoleon Страницы: 120

Бренд: QIMMIQ Страницы: 16

Бренд: QA1 Страницы: 10

Бренд: Razor Страницы: 2

RAZORX LONGBOARD

Бренд: Razor Страницы: 16

Бренд: RayTek Страницы: 93

Бренд: Alpine Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды