Craftsman CMCE030, Инструкция по эксплуатации

Страница: 15 / 44

13
English
Register Online
Thank you for your purchase. Register your product now for:
• WARRAnTY sERViCE: Registering your product will
help you obtain more efficient warranty service in case
there is a problem with your product.
• COnFiRMATiOn OF OWnERshiP: In case of an
insurance loss, such as fire, flood or theft, your registration
of ownership will serve as your proof of purchase.
•
FOR YOUR sAFETY:
Registering your product will allow
us to contact you in the unlikely event a safety notification
is required under the Federal Consumer Safety Act.
• Register online at www.craftsman.com /registration
Repairs
The charger and battery pack are not serviceable. There are
no serviceable parts inside the charger or battery pack.
WARNING: To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (including brush
inspection and replacement, when applicable) should
be performed by a CRAFTSMAN factory service center
or a CRAFTSMAN authorized service center. Always use
identical replacement parts.
Accessories Chart
1/4" Drum Sander Mandrel
Attaching sanding
drums
1/2" Drum Sander Mandrel
Wrench Changing accessories
5/8" x 3/8" Orange 120‑Grit
Aluminum Oxide Grinding
Wheel Bits
Grinding nails/screws
3/8" x 1/2" Orange 120‑Grit
Aluminum Oxide Grinding
Wheel Bits
1‑1/4" Fiberglass Cut‑off
Wheel used with mandrel
Cutting bolts, screws,
nails, and thin wood
1/4" Screw Mandrel
Attaching polishing
wheels
1/4" x 1/2" Sanding Drums,
60 Grit, 120 Grit, ard 240 Grit
used with mandrel
Sanding white pine
1/2" x 1/2" Sanding Drums,
60 Grit,120 Grit, and 240 Grit
used with mandrel
Felt Polishing Wheels used
with mandrel
Polishing and buffing
metals, stone, glass
and ceramics
Potsling Compound Vial
Polishing and
brightening metals
and plastics.
1/8" High Speed Steel
Drill Bit
Drilling
Accessories Chart
Wire Brush Wheel Brushing metal
Cut‑off Wheel Mandrel,
1/8" shank
Attaching cut‑off
discs, cut‑off wheels,
grinding wheels, and
emery wheel
1/32" Engraving Bit Engraving metals
Hgh‑speed Cutter
Shaping curved
surfaces
Conical Grinding Stone Grinding metal edges
Accessories
WARNING: Since accessories, other than those
offered by CRAFTSMAN, have not been tested with
this product, use of such accessories with this tool
could be hazardous. To reduce the risk of injury, only
CRAFTSMAN recommended accessories should be used
with this product.
Recommended accessories for use with your tool are
available at extra cost from your local dealer or authorized
service center. If you need assistance in locating any
accessory, please contact CRAFTSMAN call
1‑888‑331‑4569 .