Craftsman 137.322850 Скачать руководство пользователя страница 21

Страница: 21 / 52

Installing the Blade (Fig. H, I, J)

1. Install a 7-1/4 in. blade with a 5/8 in.

arbor hole making sure the rotation

arrow on the blade matches the

clockwise rotation arrow on the

upper guard, and the blade teeth

are pointing downward at the front

of the saw.

2. Place the blade onto the arbor.

Place the outer blade collar (6)

onto the arbor and against the

blade. Thread the arbor bolt (4)

conterclockwise onto the arbor.

(Fig. J)

IMPORTANT:

The flat side of the

blade collar must be placed against

the blade. Do not install the collar with

the curved side against the blade.

3. Place the blade wrench on the arbor

bolt (4).

4. Press the arbor lock button (5),

holding it in firmly while turning the

blade wrench counterclockwise.

Continue to press it in while

tightening the arbor bolt securely.

(Fig. I)

5. Rotate the cover plate (3) back to

its original position and tighten the

cover plate screw (2) with a Phillips

screwdriver. (Fig. H)

6. Lower the blade guard (1) back to

its original position.

7. Pull the switch handle down and

up several times to confirm the

lower blade guard operates

without binding.

8. Be sure the arbor lock button (5) is

released so the blade turns freely.

(Fig. I)

●

To avoid injury, never use the

saw without the cover plate

secure in place. It keeps the

arbor bolt from falling out if it

accidentally loosens, and helps

prevent the spinning blade from

coming off the saw.

●

Make sure the collars are clean

and properly arranged. Lower the

blade into the table and check for

any contact with the metal base

or the saw table.

SAW BLADE WRENCH STORAGE

(FIG. K)

For convenient storage and prevention

of loss, there is a slot (1) in the side of

the trigger switch handle for storing the

blade wrench (2) when not in use.

WARNING



Fig. K

Содержание 137.322850





















































Результаты поиска

Содержание 137.322850

Отзывы:

Похожие инструкции для 137.322850

Бренды по названию

Популярные бренды

Craftsman 137.322850, Руководство оператора

Результаты поиска

Содержание 137.322850

Отзывы:

Похожие инструкции для 137.322850

Бренды по названию

Популярные бренды