Step 8
For blade assembly, position blade arms and blade (4) so that all screw
holes are aligned (as shown in figure below). Using blade screws (S4),
insert through blade and up into blade arms. Tighten securely.
8
Step 9
Install glass (3) to fan by raising glass to fan and turning glass clockwise
until firmly seated.
9
Glass (3)
Blade Screws (S4)
Blade (#4)
7
Step 7
Line up arrow on mounting plate (1) to arrow on fan body inner housing
plate (2). Push outer housing (2) up and twist clockwise approximately
1/2". Outer housing unit will set in mounting bracket. Secure with outer
housing screws (S2).
Outer Housing (2)
Outer Housing
Screws (S2)
Mounting Plate
Line up arrows on mounting
plate and inner housing plate.
