Step 1
Turn off circuit breakers and wall switch to the fan
supply line leads.
Warning:
Failure to disconnect power supply prior to
installation may result in serious injury or death.To reduce
the risk of shock, this fan must be installed with an
isolating wall control/switch.
1
Step 2
Check to make sure blades are at
least 30” from any obstruction.
Check downrod length to
ensure blades are at least
7' above the floor.
2
84”
(2.1m)
Min.
30”
0.75m
Min.
Preparation
Important:
When using an existing outlet box, be sure the box is securely attached
to the building structure and can support the full weight of the fan. Failure to do
so can result in serious injury or death.
Step 3
Prior to securing mounting bracket, screw "J" hook (S7) into ceiling outlet
box as a secondary support means. Secure mounting plate (1) using screws
and washers (S2) directly to the outlet box. Arrows on mounting plate and
fan body inner housing plate will line up (see step 6). Be sure to position
arrow on mounting plate in the direction that the cowling on the fan body
should face. If not mounting to an outlet box, use wood screws (S1) and
mount securely to a beam or joist.
Note:
Do not mount directly to sheet rock or ceiling tile.
NOTE: J Hook installation is a Canadian requirement only.
3
Step 3 Continued
3
OUTLET BOX
Mounting Plate (1)
Support Beam
Ceiling
Wood Screws
& Washers (S1)
Screws & Washers
for Mounting Plate (S2)
“J” Hook (S7)
Fan Motor
Outer Housing (2)
Mounting Plate
Cowling
4
Step 4
Hang the fan motor/outer housing (2) onto the hook that is positioned on
the mounting plate (1).
