8a
Step 8a
For added security, attach safety cable from fan unit to "J" hook (S7) in
outlet box. Secure by looping zip tie (S8) through safety cable and "J" hook.
Tighten zip tie securely. Lift fan onto the mounting bracket (#1). Turn
housing until hanging ball seats itself into ball socket (listen for click).
NOTE
: Parts furnished will allow
you to install your fan at up to a 35
°
angle. Angles greater than 35
°
will
require a 45
°
angle adapter (see
dealer).
NOTE
: J Hook installation
is a Canadian requirement only.
Outlet Box (A)
Support Beam
Ceiling
Green Ground Wire
“J” Hook (S7)
OUTLET BOX
“J” Hook (S7)
Safety Cable
Zip Tie (S8)
Mounting Bracket (#1)
WARNING:
To reduce the risk of fire, electric shock or personal injury, mount
so outlet box marked "acceptable for fan support" and use mounting screws
provided with the outlet box. Most outlet boxes commonly used for the support
of lighting fixtures are not acceptable for fan support and may need to be replaced.
Consult a qualified electrician if in doubt.
6
Step 6 Continued…
For Industrial Installation:
Attach
rubber grommet assembly to the top
of the downrod being careful to firmly
secure the lock-pin.
Safety Bolt
and Nut (S6)
Set Screw (A)
Canopy (5)
Lock-pin
Flange Cover (6)
Motor Housing (7)
Screw (S2)
Industrial Installation
7
Step 7
For blade assembly, use motor screws
(S4) and insert through top of blade
holder and into motor housing unit.
Tighten securely.
Blade (8)
Motor Screws (S4)
Fan Housing & Motor
3 Blade Installation
