8b
Step 8b
For added security, attach safety cable from fan unit to "J" hook (S7) in
outlet box. Secure by looping zip tie (S8) through safety cable and "J" hook.
Tighten zip tie securely. For Industrial Mounting bracket, lift fan onto the
mounting bracket hook (2).
NOTE
: Parts furnished will allow
you to install your fan at up to a 35
°
angle. Angles greater than 35
°
will
require a 45
°
angle adapter (see
dealer).
NOTE
: J Hook installation
is a Canadian requirement only.
“J” Hook (S9)
Safety Cable
Zip Tie (S10)
WARNING:
To reduce the risk of fire, electric shock or personal injury, mount
so outlet box marked "acceptable for fan support" and use mounting screws
provided with the outlet box. Most outlet boxes commonly used for the support
of lighting fixtures are not acceptable for fan support and may need to be replaced.
Consult a qualified electrician if in doubt.
Outlet Box (A)
Support Beam
OUTLET BOX
Ceiling
Mounting Bracket (2)
“J” Hook (S7)
Step 9
1. Connect fan wires to ceiling wires: white fan wire to white outlet wire,
black to black and green to green. Wire connectors (S5) are provided for
your convenience.
2. After connections are made, turn
splices upward and push
carefully into outlet
box.
There are 3 colored
wires coming from
the top of the
motor (including ground
wire).
9
White (Neutral)
Ground
White
Black
Wire
Connectors
(S5)
Ground
(Green)
Black (Power)
Downrod Ground
(Green)
Mounting Bracket
Ground (Green)
Outlet Box
Ground (Green)
Wire Connnections
Outlet Box
Fan wires
Black
Black
(Hot wire for fan)
Green Green
(Ground wire)
White
White
(Neutral wire)
