4
Step 4
Position Downrod so the hole in the Downrod aligns with the hole in
the Flange Coupling on the Motor.
Insert Safety Bolt (S7) through
Coupling and Downrod and attach Nut
. Tighten firmly. Tighten
Set Screw "A" against downrod. Place Flange Cover (#10) and
Canopy Decorative Cover (#11) and Canopy over Downrod
Assembly. Replace Hanging Ball, insert Hanging Pin through
Downrod and tighten Set Screw "C" in Hanging Ball into Downrod.
WARNING:
Failure to completely tighten downrod could result in the fan loosening
and possibly falling.
IMPORTANT:
Black antenna wire must be connected for remote to function.
Safety Bolt & Nut (S7)
Set Screw (A)
Canopy (3)
Canopy Decorative
Cover (11)
Set Screw (C)
Downrod (2)
Top Motor Housing (4)
Ground
Wire
Ball Screw
Hanging
Pin
Hanging
Ball
Threaded Set
Screw Hole
Step 3 - Standard Down Rod Assembly (Steps 3-7)
Locate Downrod Assembly (#2). Loosen Ball Screw on black Hanging
Ball to free lock pin. Black Hanging Ball will slide down. Remove
Ground Screw and green Ground Wire. Remove Hanging Ball from
Downrod and save all parts. Insert fan wires through Downrod. Screw
Downrod into top of Fan Motor Housing, being careful that wires are
pulled through.
3
Hanging Ball
Lock Pin
Downrod
Ball Screw
Green Ground
Wire
Downrod
Assembly
(#2)
Fan Motor Housing
Motor Housing (5)
Safety Cable (Canada)
Canopy
Flange Cover
Flange Cover (10)
Canopy Decorative Cover
