page 9
11. Wall Control Operation.
The wall control is operational for fan and
light (dimmer).
12. Testing Your Fan.
It is recommended that you test fan before
finalizing installation. Slide the knobs to OFF
position on wall control. Restore power from
circuit box. Test light and dimmer function
and then test fan speeds. If fan and/or light
do (does) not function, please refer to
"Troubleshooting" section to solve any issues
before contacting Customer Service.
Turn fan completely off
before
moving the
reverse switch. Set reverse switch to
recirculate air depending on the season:
- LEFT position in summer (
diagram 1
)
- RIGHT position in winter (
diagram 2
)
A ceiling fan will allow you to raise your
thermostat setting in summer and lower your
thermostat setting in winter without feeling a
difference in your comfort.
Important
: Reverse switch must be set either
completely LEFT
or
completely RIGHT
for fan to
function. If the reverse switch is set in the
middle
position (
diagram 3
), fan will not
operate.
LOW speed
MEDIUM LOW speed
MEDIUM speed
HIGH speed
turns fan OFF
Move slide knob
up or down for
LIGHT brightness
diagram 1
diagram 2
diagram 3
reverse switch
reverse switch
motor housing
