page 6
6. Wiring. (cont.)
[
PLEASE NOTE
: Wall and/or handheld remote control
must be used for fan to operate.
If you do
not
wish to
use the wall control, please proceed to Section 7 to
continue with fan installation.
]
To install wall control
, remove existing wall switch.
Wire one of the wall controls with wire connectors
provided
as shown in diagram at right
.
*Wrap each wire connector separately with electrical
tape as an extra safety measure. Gently push wires
and taped wire connectors into outlet box.
Install one 12-volt battery (included) in wall control.
IMPORTANT
: Wall control will not function unless
battery is installed.
Since this fan comes with an LED light kit, the
dimmer switch (labeled
DIM
and
ON
) has been
pre-set to the "ON" position (
DIM
). If you do not
wish to have dimming capability, please move the
switch to the "OFF" position (
ON
).
Select a faceplate (almond or white) and press firmly
onto front of wall control. Attach wall control to
outlet box and secure with screws from original wall
switch. Attach wall plate (included) to wall control
using 2 screws provided with the wall control.
(wiring for wall control)
black (OUT to fan)
green
black
(AC IN from
breaker box)
black
(TO POWER supply)
black
green/
green/
bare
bare
ground
ground
green/
bare
ground
outlet box
wall control
face-
plate
12V battery
dimmer
switch
wall plate
DIM ON
7. Fan Assembly.
Remove motor housing from j-hook on
mounting plate. Lift motor housing to mounting
plate. Align slotted holes on top rim of motor
housing with loosened screws in mounting
plate. Twist motor housing to lock. Re-insert the
2 screws that were previously removed (page 4,
Section 4) and then tighten all 4 screws to secure
motor housing.
Locate 4 tabs
inside
housing ring. Align tabs in
housing ring with 4 screws at top of motor
housing. The tabs must fit snugly
over
the
screwheads to ensure a secure fit.
NOTE
: It is
recommended to push one tab on at a time
instead of doing all four at once.
motor
housing
mounting plate
j-hook
housing ring
slotted hole
tab
