page 8
9. Light Kit Assembly. (cont.)
diagram 2
Remove 1 screw and partially loosen the other 2
screws on outer edge of fitter plate.
Connect
WHITE
wire from motor housing to
WHITE
wire from LED light kit. Connect
BLACK
(or
BLUE
) wire from motor housing to
BLACK
wire
from LED light kit. [
NOTE
: It may be necessary to
push back sleeve on wires to be certain of wire
colors.] Be sure molex connections snap together
securely.
Carefully arrange wiring within fitter plate.
Align
slotted holes in LED light kit with loosened screws
in fitter plate. Twist LED light kit to lock. Re-insert
screw that was previously removed and tighten all
3 screws with a Phillips screwdriver. [
Refer to
diagram 2
.
]
A
lign grooves on shade with nodules on inside of
LED light kit and push up gently on shade. Twist
shade to the RIGHT (clockwise) until shade no
longer turns. [
Refer to
diagram 2
.
]
NOTE
: Pull down
VERY GENTLY
on shade to make
sure that shade is secured completely.
LED
light kit
shade
fitter plate
molex
connections
motor
housing
nodules
grooves
