page 9
*For
Model OS104
, follow instructions on this page.
*For
Model OS119
, proceed to instructions on page 10.
*For
Model OS211
, proceed to instructions on page 11.
10. Light Kit Assembly, 4-light Option.
Remove 3 screws from outer edge
of switch housing (at top of light kit
fitter).
Connect male plug from motor
housing to female plug from switch
housing, matching up the colors on
the male plug with the colors on
the female plug for correct fit. Be
sure that plugs connect securely.
Carefully arrange wiring within
switch housing. Align holes in
switch housing with holes in switch
housing plate. Re-insert screws that
were previously removed and
securely tighten all 3 screws with a
Phillips screwdriver.
Attach one shade to light kit fitter
aligning grooves on one shade with
nodules on inside of one shade
fitter. Push up gently on shade and
turn shade to the RIGHT (clockwise)
until shade locks into place. Repeat
for each shade.
Pull down VERY GENTLY on each
shade to make sure that shades are
secure.
WARNING
: Do NOT overtighten
shades as shades may crack or break.
Install bulbs included with light kit.
IMPORTANT
: When you need to
replace bulbs, please allow bulbs
and shade to cool down before
touching them.
Please proceed to Section 13 on
page 12 to complete installation.
motor
housing
switch
housing
reverse
switch
pull chain
extension
switch housing
plate
light kit fitter
shade
bulb
shade
fitter
