page 6
5. Fan Assembly. (cont.)
Remove electrical tape from electrical wiring and
thread each of the wires through a different hole
in the weatherproof hanging ball cover. Pull
weatherproof hanging ball cover down securely
over hanging ball (on downrod). [
Refer to
diagram 5
.
]
WARNING
: Failure to tighten set screw on
hanging ball completely could result in the fan
becoming loose and possibly falling.
With the hanging bracket secured to the outlet
box and able to support the fan, you are now
ready to hang your fan. Grab the fan firmly with
two hands. Slide downrod through opening in
hanging bracket and let hanging ball rest on the
hanging bracket. Turn the hanging ball slot until it
lines up with the hanging bracket tab.
WARNING
: Failure to align slot in hanging ball
with tab in hanging bracket may result in serious
injury or death.
Tip
: Seek the help of another person to hold the
stepladder in place and to lift the fan up to you
once you are set on the ladder.
Find a secure attachment point (wood ceiling joist
highly recommended) and secure safety cable. It
will be necessary to use a heavy duty wood screw,
washer and lock washer (not supplied) with the
safety cable loop. If necessary, adjust the loop at
the end of the safety cable. The loop at the end of
the safety cable should just fit over the threads on
the wood screw.
Test safety cable by pulling on
loose end of safety cable with pliers. If the safety
cable slips, the loop must be adjusted tighter.
Extra
cable slack can be left in ceiling area.
safety cable
wood ceiling
joist
wood screw
and washer
safety cable loop
motor housing
hanging ball slot
hanging bracket tab
diagram 5
set screw hole
set screw
hanging ball
canopy
stop pin
weatherproof
hanging
ball cover
electrical wiring
